Siemens SIMATIC NET ET 200SP User Manual

CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1
Operating Instructions, 01/2017, C79000-G8976-C426-03
117
Accessories
C
C.1
BusAdapter
BusAdapter
To connect to the Ethernet network, the CP requires a BusAdapter. A BusAdapter does not
ship with the CP.
Figure C-1 Example of a bus adapter, here BA SCRJ/RJ45
The CP supports the following bus adapters:
● BA 2×RJ45
PROFINET bus adapter with the following connectors:
– 2 x Ethernet jack RJ-45
Article number: 6ES7193-6AR00-0AA0
● BA 2xFC
PROFINET bus adapter with the following connectors:
– 2 x direct connection of the bus cable (FastConnect)
Article number: 6ES7193-6AF00-0AA0
● BA 2xSCRJ
PROFINET bus adapter with the following connectors:
– 2 x fiber-optic cable POF/PCF
Article number: 6ES7193-6AP00-0AA0
● BA SCRJ/RJ45
PROFINET bus adapter, media converter FO - copper with the following connectors:
– 1 x fiber-optic cable POF/PCF
– 1 x Ethernet jack RJ-45
Article number: 6ES7193-6AP20-0AA0

Siemens SIMATIC NET ET 200SP Specifications

General

Brand	Siemens
Model	SIMATIC NET ET 200SP
Category	Network Router
Language	English