Siemens SIMATIC NET SCALANCE SC642-2C User Manual

Configuring with Web Based Management
4.6 "Layer 3" menu
SCALANCE SC-600 Web Based Management (WBM)
280 Configuration Manual, 10/2021, C79000-G8976-C475-03
4.6.4.4 Address Configuration
Creating or changing the assigned IPv4 addresses
On this page, you can create, modify or delete the IPv4 addresses to be monitored. Each
virtual router can monitor one IPv4 address.
Description of the displayed values
The page contains the following boxes:
• Interface / VRID
Select the virtual router from the drop-down list.
• Associated IP address
Enter the IPv4 address that the virtual router will monitor.
The table has the following columns:
• Select
Select the row you want to delete.
• Associated IP Address
Shows the IPv4 addresses that the virtual router monitors.
Configuration procedure
1. Select the ID of the virtual router from the "Interface / VRID" drop-down list.
2. Enter the IPv4 address that the virtual router will monitor.
3. Click the "Create" button. A new entry is generated in the table.

Siemens SIMATIC NET SCALANCE SC642-2C Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC642-2C
Category	Switch
Language	English