Siemens SIMATIC NET SCALANCE W761-1 - Page 161

Configuring with Web Based Management
5.5 "System" menu
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
161
● There is a Syslog server in your network that receives the log entries. (Since this is a
UDP connection, there is no acknowledgment to the sender)
● The IP address or the FQDN name of the Syslog server is entered on the device.
Description
The page contains the following boxes:
●
Syslog Client
Enable or disable the Syslog function.
●
Server IP Address
Enter the IP address or the FQDN name of the Syslog server.
This table contains the following columns
●
Select
Select the row you want to delete.
●
Server Address
Shows the IP address or the FQDN name of the Syslog server.
●
Server Port
Enter the port of the Syslog server being used.
Procedure
Enabling function
1. Select the "Syslog Client" check box.
2. Click the "Set Values" button.