EasyManua.ls Logo

Siemens SIMATIC NET SCALANCE W761-1 - Requirements for Installation and Operation

Siemens SIMATIC NET SCALANCE W761-1
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Description
2.5 Requirements for installation and operation
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
21
Modulation and coding schemes
The IEEE 802.11n standard supports different data rates. The data rates are based on the
number of spatial streams, the modulation method and the channel coding. The various
combinations are described in modulation and coding schemes.
2.5
Requirements for installation and operation
Requirements for installation and operation of SCALANCE W700 devices
A PG/PC with a network connection must be available in order to configure
SCALANCE W700 devices. If no DHCP server is available, a PC on which the Primary
Setup Tool (PST) is installed is necessary for the initial assignment of an IP address to the
SCALANCE W700 devices. For the other configuration settings, a computer with Telnet or a
Web browser is necessary.

Table of Contents

Related product manuals