17
Temperature enab. ON
Humidity enab. OFF
A5
SHIFT
Temperature enab. ON
Humidity enab. ON
ENTER
If you enter the wrong number, you will still have to press ENTER and then re-digit
the number
Dehumidification: OFF
Vibrator: OFF
Specimens: OFF
U.V. lamp: OFF
A6
- Ignore these data for the time
being and move on to the next
page
Water recharge: OFF
Not used: OFF
Not used: OFF
SP. hum. CTRL OFF
A7
SHIFT
To improve the performance of the sys-
tem (experiment the setting)
ENTER
K1
TO VISUALIZE
• The key led light is switched on the machine starts up and carries out the
controlled humidity slope.
• Once the set temperature values have been reached, the machine will continue
along these values.
K2
• To switch off (led light switched off)
• Press
Internal chamber data are visualized.
Temp. meas. 35 °C
Humid. meas. 90 %
- To enable or disable tempera-
ture control
- To enable or disable humidity
control
- Temperature control is enabled.
If you also wish to enable
humdity control, move the
cursor to the line below and use
the same keys.
To Next Page
Loading...
Need help?
General
