Siemens SIMATIC OP7 User Manual

36
4.7 HOW TO DELETE A PROGRAMME
OP7
RAM work memory
• A programme to be deleted can be removed from the
MICRO PLC memory as follows:
SIEMENS
SIMATIC OP7
F1 F2 F3 F4
K1 K2 K3 K4
789
456
123
.
0 +/-
SHIFT
INS
DEL
HELP ENTER
ACX
ESC
MICRO
PLC
OP2605-160
Cycles Menu
Program edit : (1)
Loop table : (2)
Save program : (3)
Load program : (4)
Delete program : (5)
Ripetition : (6)
Ver. curr. progr. : (7)
Choice 5
Start progr. STOP
Monitoring : OFF
to gain access to the delete function
DELETE PROGRAM
< ESC > Prev. menu
First pos. free _ _ _
Prog. to delete _ _ _
Delete progr. OFF
R2
R3
R4
R1
R5
ESC
This indicates the first free position in
the memory
Programme to be deleted
If you wish to move a programme from one position to another, first save the programme in the new position
and then delete the programme from its old position.
To delete, for example, programme N° 4:
To move the cursor and
digit the number
DELETE PROGRAM
< ESC > Prev. menu
First pos. free _ _ _
Prog. to delete _ _ 4
Delete progr. OFF
Programme to be deleted
To switch on the delete option
DELETE PROGRAM
< ESC > Prev. menu
First pos. free _ _ _
Prog. to delete _ _ 4
Delete progr. DELE
R6
R7
SHIFT
Move the cursor and then
ENTER
THE PROGRAMME WILL BE DELETED

Siemens SIMATIC OP7 Specifications

General

Brand	Siemens
Model	SIMATIC OP7
Category	Control Systems
Language	English