Siemens SIMATIC RF186C - Page 138

Programming via OPC UA
10.3 OPC UA events
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
138 Operating Instructions, 04/2020, C79000-G8976-C512-03
Table 10- 30 Command
Data type
String
Description
Command that was executed during the last transponder access
operation.
Possible values
Depending on the client interface used:
PNIO, PB, EIB
(Ident profile):
• INVENTORY
• WRITE-ID
• KILL-TAG
• LOCK-TAG-BANK
• PHYSICAL-READ
• PHYSICAL-WRITE
• FORMAT
• TAG-STATUS
• GET
• PUT
• NEXT
PNIO, PB (FB 45):
• WRITE
• READ
• INIT
• MDS-STATUS
OPC UA:
• Scan
• ReadTag
• WriteTag
• KillTag
• LockTag
• SetTagPassword
• Read
• Write
WBM, XML:
• readTagIDs
• writeTagID
• readTagMemory
• writeTagMemory
• killTag
• lockTagBank
• getTagStatus
READPOINT:
• Observed
--
The property "LastAccessResult" is a field of "RfidLastAccessResult" structures. A field entry
or a structure carries the information for a transponder that was accessed by the
"Command". If multiple transponders were accessed by the command, the field has multiple
entries.