Siemens SIMATIC RTU3041C - Page 44

2 Engineering
Securely Connecting RTU3041C to TeleControl Server Basic
Entry ID: 109739240, V3.0, 07/2021
44
© Siemens AG
2021 All rights reserved
43. Click the analog memory bit 1.
44. Enable the "Active" checkbox.
45. Assign the name "fillLevelPercent".
46. Select the type "Analog value".
47. Then click "Apply".
43
44
46
47
45
48. Click the analog memory bit 2.
49. Enable the "Active" checkbox.
50. Assign the name "distance".