Securely Connecting RTU3041C to TeleControl Server Basic
Entry ID: 109739240, V3.0, 07/2021
4. Create a new project by clicking "Add".
5. Assign a project name and a server password with which Engineering Stations
can connect to the TeleControl server.
– The server password is not relevant for this application example, but must
be assigned.
– The SMS gateway operator is not relevant for this application example.
6. Then click "Create".
The parameter "Project number" must match the parameter in Section 2.2.2 in the
configuration of the connection to the TeleControl Server (Step 7).
To Next Page
Loading...
Need help?
General