Siemens SIMATIC RTU3041C - Page 67

2 Engineering
Securely Connecting RTU3041C to TeleControl Server Basic
Entry ID: 109739240, V3.0, 07/2021
67
© Siemens AG
2021 All rights reserved
8. Select "RTU3041C".
9. Enter
– a station name
– a unique station number
– a TeleControl password.
Note
The parameters "Station number" and "Telecontrol password" must match the
parameters in Section 2.2.2 in the configuration of the connection to the
TeleControl Server (Step 7).
10. Click "OK".
10
Note
If you use more than one RTU, you can configure all RTUs in this step. To do this,
select "Add multiple connections" and assign the station data. Click "OK".