Siemens Simatic S7-1500 / ET 200MP - Page 10

Product overview
2.1 Properties
Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)
Equipment Manual, 07/2020, A5E48025116-AA
9
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function Firmware version
of the module
Configuration software
STEP 7
(TIA Portal)
as of V16 and HSP 0319
GSD file in STEP 7
(TIA Portal) V12 or higher,
or STEP 7
V5.5 SP3 or higher
Firmware update
V1.0.0 or higher
X
--- / X
Identification data I&M0 to I&M3
V1.0.0 or higher
X
X
Module-internal Shared Input (MSI)
V1.0.0 or higher
X
(PROFINET IO only)
X
(PROFINET IO only)
Configurable submodules / submodules for
Shared Device
V1.0.0 or higher
X
(PROFINET IO only)
X
(PROFINET IO only)
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories are supplied with the module and can be ordered as spare parts:
• U connector
• Universal front door with the article number: 6ES7 591-8AA00-0AA0
You can find additional information in the system manual S7-1500/ET 200MP
(http://support.automation.siemens.com/WW/view/en/59191792
).
Other components
The following must be ordered separately:
• SIMATIC TOP connect connection module
• Pre-fabricated connecting cable with IDC connectors
For additional information, see section Connecting a module with a connection module
(Page 14)