Siemens Simatic S7-1500 / ET 200MP - Configuring;address space; System Environments and Configuration Methods

Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)
20 Equipment Manual, 07/2020, A5E48025116-AA
Address space
4
The module can be configured in various ways in STEP 7. Depending on the configuration,
additional/different addresses are assigned in the process image output/input.
Configuration options of DI 64x24VDC SNK/SRC BA
You can configure the module with STEP 7 (TIA Portal) or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different short designations/module names.
The following configurations are possible:
Table 4- 1 Configuration options
Configuration Short designation/module
name in the GSD file
Configuration software, e.g., with STEP
7 (TIA Portal)
Integrated in the
hardware catalog
of STEP 7
(TIA Portal) as of
V16 and HSP 0319
GSD file in STEP 7
(TIA Portal) V12 or
higher or STEP 7
V5.5 SP3 or higher
1 x 64-channel without value status
DI 64x24VDC SNK/SRC BA
X
X
8 x 8-channel without value status
DI 64x24VDC SNK/SRC BA S
X
(PROFINET IO only)
X
(PROFINET IO only)
1 x 64-channel with value status for module-
internal Shared Input (MSI) with up to 4 sub-
modules
DI 64x24VDC SNK/SRC BA MSI
X
(PROFINET IO only)
X
(PROFINET IO only)