Siemens Simatic S7-1500 / ET 200MP - 6 Technical Specifications

Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)
28 Equipment Manual, 07/2020, A5E48025116-AA
Technical specifications
6
Technical specifications of DI 64x24VDC SNK/SRC BA
The following table shows the technical specifications as of 07/2020. You can find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/ps/td
).
Enter the article number or the short designation of the module on the website.
Article number
6ES7521-1BP00-0AA0
General information
Product type designation
DI 64x24VDC BA
HW functional status
From FS01
Firmware version
V1.0.0
•
FW update possible
Yes
Product function
• I&M data
Yes; I&M0 to I&M3
• Isochronous mode
No
• Prioritized startup
No
Engineering with
• STEP 7 TIA Portal configurable/integrated
from version
V16 with HSP 0319 / V17
• STEP 7 configurable/integrated from ver-
sion
V5.5 SP3 / -
• PROFIBUS from GSD version/GSD revision
V1.0 / V5.1
Operating mode
•
DI
Yes
•
Counter
No
•
Oversampling
No
•
MSI
Yes
Power
Power available from the backplane bus
0.6 W
Power loss
Power loss, typ.
4.8 W
Digital inputs
Number of digital inputs
64
Digital inputs, parameterizable
No
Source/sink input
Yes
Input characteristic curve in accordance with
IEC 61131, type 3
Yes