Wiring
3.4 Wiring of the module
Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)
Equipment Manual, 07/2020, A5E48025116-AA
17
4. Tighten the cable tie for the strain relief.
Figure 3-4 Fastening the cable tie for the strain relief
5. Plug the SIMATIC TOP connect connecting cables with the 50-pin IDC connector into the
SIMATIC TOP connect connection module.
Additional information
You can find out how to wire the SIMATIC TOP connect connection module in the equipment
manual SIMATIC TOP connect for S7-1500 and ET 200MP
(https://support.industry.siemens.com/cs/ww/en/view/95924607
).
To Next Page
Loading...
