Siemens SIMATIC S7-1500R/H

3.5.2 Front view of the CPU without front panel and bottom view
The figure below shows the operator controls and connection elements of the
CPU1515R‑2PN.






① LED displays for the current operating state and diagnostic status of the CPU
② Connector for the display
③ LED displays for the PROFINET interface
④ STOP and RUN operating mode buttons
⑤ STOP-ACTIVE LED
⑥ Connector for power supply
Figure 3-5View of the CPU1515R‑2PN (without front panel or display) - front
NOTE
Removing the display
Only remove the display if it is faulty.
You can find information on removing and replacing the display in the system manual
SIMATIC S7-1500R/H redundant system.
22
CPU 1515R-2 PN (6ES7515-2RN03-0AB0)
Equipment Manual, 11/2022, A5E42009914-AD
Product overview
3.5 Operator controls and display elements