Siemens Simatic S7-1500R Equipment Manual

CPU 1513R-1 PN (6ES7513-1RL00-0AB0)
Equipment Manual, 05/2021, A5E42009333-AC
9
Product overview
2
2.1 New functions in firmware version V2.9
This section contains an overview of the most important new firmware functions of the CPU
since the last edition of the manual.
New functions of the CPU in firmware version V2.9
New functions
Customer benefits
Where can I find information?
Influence switchover time
of switched S1 devices
As of FW version V2.9, you can influence the switch-
over time between disconnection and return of
switched S1 devices after a failure/STOP of the prima-
ry CPU.
This function offers the following advantages:
• Optimization of the switchover time between
disconnection and return of switched S1 devices
PROFINET function manual
(http://support.automation.siemens.co
m/WW/view/en/49948856)
MRP interconnection
The MRP interconnection procedure is an extension of
MRP. MRP interconnection enables the redundant
coupling of 2 or more rings with MRP in PROFINET
networks.
MRP interconnection offers the following advantages:
• When setting up redundant network topologies,
there is no limitation to the maximum number of
devices of 50 devices in a ring.
• Monitoring of larger topologies with ring redun-
dancy.
Simulation of R/H-CPUs
PLCSIM Advanced V4.0 supports simulation of R/H-
CPUs
• Virtual commissioning of machines with R/H-CPUs
in a system
• Automatic testing of the STEP 7 user program
The simulation offers the following advantages:
• Early error detection and risk minimization
• Reduced response times
•
No hardware costs
S7-PLCSIM Advanced Function Manual
(https://support.industry.siemens.com/c
s/ww/en/view/109773484)

Siemens Simatic S7-1500R Specifications

General

Brand	Siemens
Model	Simatic S7-1500R
Category	Controller
Language	English