Siemens SIMATIC S7 - FC 179 F_INT_RD: Reading a Value of the INT Data Type from an F-DB

Examples of the Parameter Assignment of ADDR_INT, END_INT, and OFFS_INT
Declaration
Example 1
Address Name
Type Initial Value Comments
Example 2
Example 3
1.2.13 FC 179 "F_INT_RD": Reading a Value of the INT Data Type from
an F-DB
Connectors
Parameter Data Type Description
ADDR_INT POINTER Start address of the INT area
in an F-DB
END_INT POINTER End address of the INT area in an F-DB
OFFS_INT INT Address offset in the INT area
Inputs
Outputs
OUT INT Value to be read from the F-DB
Product Information for the S7 Distributed Safety, Configuring and Programming Manual
A5E00169432-02
47