Siemens SIMATIC TP900 Comfort INOX PCT - Clean screen for Touch HMI devices; Chemical Resistance

Technical specifications
5.2 Certificates and approvals
Comfort Panels INOX PCT
34 Compact Operating Instructions, 05/2018, A5E38804191-AA
EU Declaration of Conformity
The EU Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens AG
Digital Factory
Factory Automation
DF FA AS SYS
P.O. Box 1963
D-92209 Amberg, Germany
The Declaration of Conformity and other certificates are also available at the following
Internet address: Certificates for Comfort Panels
(http://support.automation.siemens.com/WW/view/en/47182890/134200).
UL approval
Observe the following information:
● The device shall be supplied from an isolating source, rated 24 VDC.
● Only for use in LAN, not for connection to telecommunication circuits.
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
● UL 1604 (Hazardous Location)
● CSA-213 (Hazardous Location)
Approved for use in
● Class I, Division 2, Group A, B, C, D T4 or
● Class I, Zone 2, Group IIC T4 or
● non-hazardous locations
FM Approval
Factory Mutual Research (FM) conforming to
● Approval Standard Class Number 3611, 3600, 3810
● CSA C22.2 No. 213
● CSA C22.2 No. 1010.1
Approved for use in
● Class I, Division 2, Group A, B, C, D T4
● Class I, Zone 2, Group IIC T4