Comfort Panels INOX PCT
Compact Operating Instructions, 05/2018, A5E38804191-AA
7
The INOX devices with touch screen and glass front are designed for use in ambient
conditions that prevail in the food and beverage industry and the pharmaceutical industry.
The devices are suitable for use in the spray area (according to DIN 1762-2) as well as for
indirect contact with acidic, alcoholic and dry food (intended use).
Indirect contact in this case means alternating contact of the device and food in the process
by the operating personnel.
To comply with the permissible limits for indirect contact with food, the device must be
regularly cleaned (see section "Cleaning and maintenance (Page 27)").
Particular attention has been paid to ensuring that the device is easy to clean and can be
disinfected when needed. The devices with stainless steel front have therefore been
developed according to DIN EN 1672-2 "Food Processing Machinery - Safety and Hygiene
Requirements".
● Resistant to scratch and impact, hardened glass (Mohs 6) in stainless steel frame
● Resistant glass and sturdy stainless steel front with minimized grooves and crevices
● Optimized frame design with minimized protrusions to the control cabinet and for
automatic runoff of liquids
● Stainless steel surface polished with grain size 240
● IP66K/P69K degree of protection on front
● Chemical resistance to cleaning agents and disinfectants as described in section
"Chemical Resistance (Page 31)".
● Replaceable device mounting gasket
● Rear clamping frame for even application pressure of the mounting gasket
● Mounting cutout and interfaces correspond to the standard device.
To Next Page
Loading...
