Interfaces
3.4 Digital inputs/digital outputs
SIMOTION D4x5
50 Manual, 02/2012
Bidirectional digital inputs/outputs
The Control Unit has 8 digital inputs/outputs (DI/DO).
When the DI/DO are assigned as digital inputs, they can be used as follows:
● DI/DO9 to 11 and DI/DO13 to 15 can be used as high-speed inputs of measuring inputs
or for external zero marks.
The assignment of the inputs is not fixed, and the special use is activated in the
SIMOTION SCOUT engineering system.
● All eight digital inputs/outputs can be used as freely addressable inputs or as homing
inputs.
When the DI/DO are assigned as digital outputs, they can be used as follows:
● Use as freely addressable outputs
● Use as high-speed DO
● Use as high-speed outputs of output cams
Note
Shielded cables are required when connecting measuring inputs or external zero marks
for optimal noise immunity.
Additional references
For information on configuring the DI/DO as freely addressable I/O, measuring inputs or
outputs of output cams, see the
SIMOTION D4x5
Commissioning and Hardware Installation
Manual.
For information on the configuration and function of the measuring input, output cam, and
cam track technology objects, refer to the
SIMOTION Output Cams and Measuring Inputs
Function Manual.
To Next Page
Loading...
Need help?
General
