Preface
Equipment Manual contents
This document is part of the SIMOTION D documentation package.
Scope
The
SIMOTION D410
device manual is valid for the devices SIMOTION D410 DP and
SIMOTION D410 PN.
A separate
SIMOTION D410‑2
Manual is available for the SIMOTION D410‑2 DP and
D410‑2 DP/PN devices.
Information in this manual
The following is a description of the purpose and use of the equipment Manual:
● Description
This section provides information pertaining to the SIMOTION system and its integration
into the information landscape.
● Operator Control (hardware)
This section describes the operating elements and how to operate them.
● Interfaces
This section provides information on the interfaces, pin assignments and application
options.
● Installing
This section explains how you configure a mechanical layout and install the
SIMOTION D410 in a control cabinet.
● Connecting
This section describes how to connect and network the SIMOTION D410.
● Technical data
This section describes the properties and features of the SIMOTION D410.
● Spare Parts/Accessories
This section provides information on accessories and spare parts for the SIMOTION D410.
● Appendix
This section provides information on the various standards, approvals and ESD guidelines.
● Index to locate information
SIMOTION Documentation
An overview of the SIMOTION documentation can be found in the SIMOTION Documentation
Overview document.
SIMOTION D410
Manual, 04/2014 3
To Next Page
Loading...
Need help?
General
