Certificates 10.98
6SE7087-6KP50 Siemens AG
14-2 Operating Instructions SIMOVERT MASTERDRIVES
Test Certificate
Erlangen, 15.09.1998
Equipment
drive converter
SIMOVERT
MASTERDRIVES
The 100% inspection was performed according to test instructions
Motion Control 6SE70xx-xxPxx.
II.
Insulation test
•
Acc. to EN 50178, Section 9.4.5.2 and
UL508/CSA 22.2-14.M 91, Section 6.8
III. Function test
acc. to EN 50178
•
Initialization and start-up
Customer terminals test
Power section inspection
Inspection of protection and monitoring
devices
•
•
•
IV. RUN-IN
•
The equipment complied with the test requirements.
The test results are documented within the test data base.
1) See rating plate for complete type designation, serial number and technical data
A&D DS A PE D P
Schlögel
Automation and Drives
V. Function test
acc. to EN 50178
•
see III. Function test
•
Type
•
Order No. 6SE70xx-xxPxx
1)
Test scope:
I. Protective conductor
test
•
According to DIN VDE 0411
Continuous test > 5 hours
ambient temperature 55 °C
To Next Page
