Siemens SINAMICS G120 PM240P-2 - Sequence for Installing the Power Module

Installing
3.4 Mounting the Power Modules
Power Module PM240P-2
Hardware Installation Manual, 06/2020, A5E37800827C AD
27
3.4.1 Sequence for installing the Power Module
During installation, comply with the sequence listed below.
1. Prepare the cabinet.
2. If you are using a Brake Relay or Safe Brake Relay:
Install the Brake Relay on the rear side of the shield plate.
3. Mount the shield plates.
4. Install the Power Module.