Siemens SINAMICS G120 PM240P-2 - Page 86

Spare parts and accessories
7.2 Optional accessories
Power Module PM240P-2
84 Hardware Installation Manual, 06/2020, A5E37800827C AD
Assignment tables
Power Module, 400 V
Line harmonics filter
Frame
size
Article number
Power [kW]
Article number
FSD 6SL3210-1RE24-5 . L0
6SL3210-1RE26-0 . L0
6SL3210-1RE27-5 . L0
22
30
37
UAC:FN344022115E2FAJRX
UAC:FN344030115E2FAJRX
UAC:FN344037115E2FAJRX
FSE 6SL3210-1RE28-8 . L0
6SL3210-1RE31-1 . L0
45
55
UAC:FN344045115E2FAJRX
UAC:FN344055115E2FAJRX
FSF 6SL3210-1RE31-5 . L0
6SL3210-1RE31-8 . L0
6SL3210-1RE32-1 . L0
6SL3210-1RE32-5 . L0
75
90
110
132
UAC:FN344075116E2FAJRX
UAC:FN344090116E2FAJRX
UAC:FN3440110118E2FAJRX
UAC:FN3440132118E2FAJXX
Clearances to other devices
Line harmonics filters are best installed as close as possible to the non-linear load. Ideally
they are mounted next to the converter inside the electrical cabinet.
In order to ensure sufficient air flow, keep a clearance of minimum 150 mm above and below
the filter to walls or other components.
It must be ensured that the environmental temperature is kept below 45 °C with appropriate
thermal management (e.g. cabinet cooling). Filter operation in environments with higher
temperatures require a temperature derating.