Siemens SINAMICS G120 - Page 134

Index
Power Module PM240
134 Hardware Installation Manual, 07/2009, A5E00807525B AD
Light Overload (HO) input currents, 68
Line contactor, 47
Line filter
Installing, 76, 78, 84
Technical specifications, 86
Line reactor
Installing, 76, 78
Technical specifications, 80
M
Maintenance
Cleaning, 51
Contamination, 51
Dirt, 51
Terminals, 51
Ventilation, 51
Mechanical installation, 16
Minimum distance
above, 22
below, 22
front, 22
side by side, 22
O
Operating temperature, 67
Operation with Residual Current Devices (RCD), 38
Operation with screened cables, 39
Operation with ungrounded supplies, 37
Operation with unscreened cables, 39
Operational altitude, 68
Output reactor, 39
Installing, 76, 78, 88
Technical specifications, 89
P
Personal protective equipment, 19
Power and motor terminal layout, 43
Power Distribution Systems, 36
Power Drive System (PDS), 124, 125
Power losses, 20, 21
Power Modules
Dimension drawings, 22
Overview, 8
Specifications, 68
Technical specifications, 65
PPE, 19
Pulse frequency, 66
R
Removing the front cover, 33
S
Safe Brake Relay, 116
Safety notes
Commissioning, 15
Dismantling and disposal, 18
Electrical installation, 16, 35
General Warnings, Cautions and Notices, 14
Mechanical installation, 16
Operation, 17
Repair, 18
Safety Instructions, 13
Transport and storage, 15
Screen termination kit, 122
Screened cable, 125
Screened cables, 39
Screening methods, 48
Screening without a Screen Termination Kit, 48
Second Environment, 124
Self certification, 123
Service life of the fan, 52
Signal connections, 45, 47
SINAMICS G120 range, 7
Sine-wave filter, 39
Installing, 76, 78, 94
Technical specifications, 95
Spare parts, 52
Standards, 128
2006/95/EC, 128
EC/89/336, 123
EN 55011, 126
EN 60146-1-1, 127
EN 60204-1, 128
EN 60950, 36
EN 61000-2-4, 127
EN 61000-4-11, 127
EN 61000-4-2, 127
EN 61000-4-3, 127
EN 61000-4-4, 127
EN 61000-4-5, 127
EN 61000-4-6, 127
EN 61140, 36
EN 61800-3, 124
EN 61800-3, 128
EN 61800-3:2004, 123
EN 61800-5-1, 128
ISO 9001, 128
SEMI F47-0706, 128