Using SINAMICS G120 / G120C / S120 Blocksize converters in marine applications
Application Manual, 11/2019, A5E48346362A
5
Not observing fundamental safety instructions and residual risks
If the basic safety instructions and residual risks are not carefully observed in the Power
Module documentation, accidents involving severe injuries or death may occur.
• Adhere to the fundamental safety instructions.
• When assessing the risk, take into account residual risks.
Improper transport or installation of the Power Modules
Serious injury, or even death and substantial material damage can occur if the Power
Modules are not transported or installed properly.
• Transport, install and remove the Power Modules only if you are fully qualified to do so.
• Take into account that in some cases the Power Modules are heavy and top-heavy –
and take the necessary precautionary measures.
• Always secure the Power Modules when installing or removing by securely attaching
them to crane hooks.
• Wear your personal protection equipment (e.g. safety shoes, gloves).
To Next Page
Loading...
