Siemens SINAMICS G120C Applications Manual

SINAMICS
Using SINAMICS G120 / G120C /
S120 Blocksize converters in
marine applications
Application Manual
11/2019
A5E48346362A
Safety information
1
Introduction
2
Components for marine
applications
3
Referencing the standard
documentation of the
components
4
Presentation of the "PM240"
system being considered
5
System configuration for
marine applications
6
Marine-specific application
conditions
7
Marine-specific installation
regulations
8

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating