Siemens SINAMICS G120C Applications Manual

Using SINAMICS G120 / G120C / S120 Blocksize converters in marine applications
Application Manual, 11/2019, A5E48346362A
7
Introduction
2
This Manual describes the use of converters, based on PM240-2 Power Modules, for marine
applications.
The same technical requirements regarding function, ruggedness and protection & safety
apply for marine applications, just the same as for industrial applications. Therefore,
reference is made to the standard documentation available for the components involved.
However, marine-specific operating conditions require restrictions and/or additional
measures, which are explained in this Manual.

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating