Siemens SINAMICS G180 - Page 51

Assignment of the message groups for the bit generators
Display messages
05/2020, 4BS0576F-004
49
Message group
Single message
MessGr flt. gen.
MessGr flt. syst.
MessGr flt. DCcrt
MessGr flt>T-ins.
MessGr flt<T-ins.
MessGr flt>T-cool
MessGr flt<T-cool
MessGr flt T-reac
MessGr flt. PS
MessGr flt. curr
MessGr ft<V-mains
MessGr ft FW/CB08
MessGr wrg. gen.
MessGr wrg. syst.
MessGr wrg>T-ins.
MessGr wrg<T-ins.
MessGr wrg>T-cool
MessGr wrg<T-cool
MessGr wrg T-reac
MessGr suppr.flt.
MessGr no ON
Msg-Nr
Text in line 1
Text in line 2
Selection text
3016 !! Inverter fault !! Commun.DSP->uP x x
3017 !! Inverter fault !! Current transformer x x
3018 !! Inverter fault !! Power unit unknown x
3019 !! Inverter fault !! Wrong power unit x
3020 !! Inverter fault !! Temperature inside x x
3021 !! Inverter fault !! Temp.Sensor Cool.1 x
3022 !! Inverter fault !! Temp.Sensor Cool.2 x
3023 !! Inverter fault !! Temp.Sensor Cool.3 x
3024 !! Inverter fault !! Temp.Sensor Cool.4 x
3025 !! Inverter fault !! Temp.Sensor Cool.5 x
3026 !! Inverter fault !! TempSensorRectifier x
3027 !! Inverter fault !! TempSensorCabinet x
3028 !! Inverter fault !! Current control x
3029 !! Inverter fault !! ResistOutpFilter IF>R-outpFilter x x
3030 !! Inverter fault !! IntermCircFuse IF>IC-fusing x x x
3031 !! Inverter fault !! InputReactor 1 IF>InpReactor 1 x x x
3032 !! Inverter fault !! InputReactor 2 IF>InpReactor 2 x x x
3033 !! Inverter fault !! OutputReactor 1 IF>OutpReactor 1 x x x
3034 !! Inverter fault !! OutputReactor 2 IF>OutpReactor 2 x x x
3035 !! Inverter fault !! I2C-Bus x x
3036 !! Inverter fault !! EarthCurrentMetering x
3037 !! Inverter fault !! Ter. X81:13 inactive x
3038 !! Inverter fault !! Ter. X81:14 inactive x
3039 !! Inverter fault !! Test safe torque off IF>Test STO X x
3040 !! Inverter fault !! Test PTC X3:90/91 x
3044 !! Inverter fault !! PerformParameters x
3060 !! Fault !! Interr. RS485 (X26) x