Creating the drive project ONLINE
3.5 Operating the drive with the control panel
Getting Started
24 Function Manual, 10/2008, 6SL3097-4AG10-0BP0
1. To assume control priority, choose the gray button Assume control priority! (This button is
surrounded by a black border indicating that the field is active. This border appears
throughout the following process to act as a guide.)
Figure 3-13 Assume control priority
2. The "Assume control priority" window is displayed:
Figure 3-14 "Assume control priority" window
3. In this window, you can activate/deactivate lifetime monitoring and set the monitoring
time. Read the safety information and choose Accept. The appearance of the control
panel now changes: The gray button Assume control priority! now changes to the yellow
button Return control priority!. The Enables field is now active. The enables have not yet
been assigned.
To Next Page
Loading...
