Creating the drive project ONLINE
3.5 Operating the drive with the control panel
Getting Started
Function Manual, 10/2008, 6SL3097-4AG10-0BP0
25
Figure 3-15 Activate enable signals 1
4. When you choose Enables, they are automatically assigned (the color of the enable
signals under "Diagnostics" changes and the Enables field is selected). On the control
panel, the control buttons l/O for drive ON and OFF as well as jog mode for the drive
become active (colored).
Figure 3-16 Activate enable signals 2
To Next Page
Loading...
