Creating the drive project ONLINE
3.5 Operating the drive with the control panel
Getting Started
26 Function Manual, 10/2008, 6SL3097-4AG10-0BP0
5. The " n =" (speed) field is now active. Enter the speed in the now active n=...... field and
confirm this by choosing Enter. If the speed is preceded by a minus sign, the direction of
rotation of the motor is reversed.
Figure 3-17 Setting the speed
6. You can now start the motor by choosing the green l button!
If you press the red O button, the motor stops again. You can use the slider to the right of
the "n =" field to set the speed during operation to between 0% and 200%.
When you click the red/green JOG button, the motor runs at the specified speed for as
long as you keep the mouse button depressed.
To switch off the drive, choose the red O button. The drive comes to a standstill. To return
control priority, choose Return control priority!. The system asks if you are sure you want to
return control priority. Confirm this query to return control priority.
To Next Page
Loading...
