Siemens SINUMERIK 802C Diagnostics Guide

1 Alarms 01.02
6FC5598-3AA20-0BP2 © Siemens AG 2002 All Rights Reserved
1-100 SINUMERIK 802S/802C (DG)
No./Name Explanation Not allowed if Remedy
38. INITIALINISTART Start machine
data processing
(INI file is already
in NCK),
(PI command)
39. INITIALINIEXTSTART Start machine
data processing
(INI file is exter-
nally, e.g. on
MMC), (PI
command)
40. BAGSTOP_SLBTYPA Stop due to
single block
mode. VDI
signal, individual
type A (only
executable
blocks), after
stop in other
channel of this
mode group
41. BAGSTOPATEND_
SLBTYPB
Stop due to
single block
mode group.
VDI signal,
individual type A
(any blocks),
after stop at end
of block in other
channel of this
mode group
42. OVERSTORE_
BUFFER_END_
REACHED
Stop because
end of overstore
buffer
“_N_OSTOREXX
_SYF“ has been
reached.
43. PREP_STOP Start block
search (NC
block: Stopre)
44. PROG_STOP Stop program
execution at end
of block (NC
block: M00/M01)
45. STOPPROGABLOCK
END
Stop program
execution at end
of block (alarm,
VDI signal: NC
stop at end of
block)
46. STOPPROGATASUP
END
Stop at ASUP
end, is start has
been carried out
from "Stopped".
47. PROGSELECT Select program.
(PI command)
48. PROGSELECTEXT Select the pro-
gram which is
already on an
external (PI
command)
49. CHANNEL_PROG
SELECT
Program selec-
tion from another
channel (channel
communication,
NC block: INIT)
50. ASUPDEFINITION Save definition of
ASUPS which
can be activated
(PI command)

Siemens SINUMERIK 802C Specifications

General

Brand	Siemens
Model	SINUMERIK 802C
Category	Control Systems
Language	English