Siemens SINUMERIK 802C Diagnostics Guide

01.02 1 Alarms
© Siemens AG 2002 All Rights Reserved 6FC5598-3AA20-0BP2
SINUMERIK 802S/802C (DG) 1-11
NC Start inhibited.
NC Stop at alarm.
Please contact the hotline indicated in the beginning of this Manual and specify
the operating system error number.
Power ON
Channel %1 system error %2
%1 = Channel number
%2 = System error number
This alarm refers you to internal error conditions, which in conjunction with
the error number contained in the error message provide information on the
error cause and the error location.
Alarm display.
Interface signals are set.
NC not ready for operation.
NC Start inhibited.
NC Stop at alarm.
Please contact the hotline indicated in the beginning of this Manual and specify
the operating system error number.
Power ON
Channel %1 %3 system error %2
%1 = Channel number
%2 = System error number
%3 = Channel parameter: Block number, label
This alarm refers you to internal error conditions, which in conjunction with
the error number contained in the error message provide information on the
error cause and the error location.
Alarm display.
Interface signals are set.
Interpreter stop.
NC Start inhibited.
Please contact the hotline indicated in the beginning of this Manual and specify
the operating system error number.
Press the RESET key to clear the alarm. Restart part program.
Channel %1 system error %2
%1 = Channel number
%2 = System error number
This alarm refers you to internal error conditions, which in conjunction with
the error number contained in the error message provide information on the
error cause and the error location.
Alarm display.
Remedy
Program continua-
tion by
1 010
Explanation
Response
Remedy
Program continua-
tion by
1 011
Explanation
Response
Remedy
Program continua-
tion by
1 012
Explanation
Response

Siemens SINUMERIK 802C Specifications

General

Brand	Siemens
Model	SINUMERIK 802C
Category	Control Systems
Language	English