1 Alarms 01.02
6FC5598-3AA20-0BP2 © Siemens AG 2002 All Rights Reserved
1-12 SINUMERIK 802S/802C (DG)
Please contact the hotline indicated in the beginning of this Manual and specify
the operating system error number.
Press the Clear key to clear the alarm. No further operation required.
Channel %1 system error %2
%1 = Channel number
%2 = System error number
This alarm refers you to internal error conditions, which in conjunction with
the error number contained in the error message provide information on the
error cause and the error location.
Alarm display.
Interface signals are set.
NC Stop at alarm.
NC Start inhibited.
Please contact the hotline indicated in the beginning of this Manual and specify
the operating system error number.
Press the RESET key to clear the alarm. Restart part program.
Channel %1 axis %2 system error %3
%1 = Channel number
%2 = Axis number
%3 = System error number
This alarm refers you to internal error conditions, which in conjunction with
the error number contained in the error message provide information on the
error cause and the error location.
Alarm display.
Interface signals are set.
Channel not ready for operation.
Please contact the hotline indicated in the beginning of this Manual and specify
the operating system error number.
Press the RESET key to clear the alarm. Restart part program.
Channel %1 axis %2 system error %3
%1 = Channel number
%2 = Axis number
%3 = System error number
This alarm refers you to internal error conditions, which in conjunction with
the error number contained in the error message provide information on the
error cause and the error location.
Alarm display.
Interface signals are set.
Please contact the hotline indicated in the beginning of this Manual and specify
the operating system error number.
Remedy
Program continua-
tion by
1 014
Explanation
Response
Remedy
Program continua-
tion by
1 015
Explanation
Response
Remedy
Program continua-
tion by
1 016
Explanation
Response
Remedy
To Next Page
Loading...
Need help?
General
