Siemens SINUMERIK 808D ADVANCED Training Manual

808D ADVANCED Page 75 Programming and Operating — Turning
Additional
Information
Part 1
s
SEQUENCE
Time
change
You can change the time on the control if required
when the clocks changes from summer time to winter
time.
Press the “Date time” SK on the PPU.
Make sure the password is set to the “CUSTOMER” access level.
Press “Shift” and “Alarm” on the PPU simultaneously.
Enter a new “Date” and “Time”
“Save data” enables the complete system to be
backed up on the system CF card so that there is a
system backup available to the operator.
Press the “OK” SK on the PPU to up date
Save data
Press the “Save data” SK on the PPU.
Make sure the password is set to the “CUSTOMER” access level.
Press “Shift” and “Alarm” on the PPU simulta-
neously.
Press the “Cancel” SK on the PPU to abort the
operation.
+
+
Press the “HMI” SK on the PPU.

Siemens SINUMERIK 808D ADVANCED Specifications

General

Brand	Siemens
Model	SINUMERIK 808D ADVANCED
Category	Control Unit
Language	English