Technical specifications
4.1 Radio interference
Electrical Installation Manual
42 Operating Instructions, 12/2014, 6FC5397-2EP10-0BA0
Shock resistance (in operation) 10 g peak value, 6 ms duration
6 shocks in each of the 3 axes vertical to each other
Rated output voltage 3 V -
Maximum capacity 950 mAh -
Life time 3 years -
CE CE
Table 4- 1 Limit values for radio interference suppression in industrial environments
Limit class according to EN61800-3
Conducted radio interference C3
Radio interference C3
You must consider interference radiation for the complete
system. Particular attention should
be paid to cabling. Contact your sales representative for assistance and support.
If compliance with limit value class C2 is required, contact your local Siemens sales partner.
To Next Page
Loading...
Need help?
General
