Siemens SINUMERIK 840D sl Series User Manual

08/2005 List of Action Numbers
3-953
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
No. 17
No. 18
No. 19
No. 20
No. 21
Explanation Abort subroutine processing (VDI signal: Program level abort).
Not allowed if 1. Nesting depth too great
2. the active block, after which deceleration takes place, cannot be reorganized (occurs
when deceleration takes place over several blocks).
Remedy Abort program
Explanation Activate single block (VDI signal: Activate single block).
Not allowed if -
Remedy -
Explanation Deactivation of single block (VDI signal: Activate single block).
Not allowed if -
Remedy -
Explanation Activate main run single block (OPI variable and VDI signal: Activate single block).
Not allowed if -
Remedy -
Explanation Activate decoding single block (OPI variable and VDI signal: Activate single
block).
Not allowed if 1. Nesting depth too great
2. The active block, after which deceleration takes place, cannot be reorganized (occurs
when deceleration takes place over several blocks).
Remedy − Wait until the preceding asynchronous subroutine is terminated or abort the pro-
gram
− Abort program

Siemens SINUMERIK 840D sl Series Specifications

General

Control Type	CNC
PLC	Integrated SIMATIC S7-300
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Max Axes	31
Programming Languages	DIN/ISO 66025, high-level language (C/C++), Siemens programming languages (e.g., ShopMill, ShopTurn)
Safety Features	Integrated safety functions (Safety Integrated)
Operating System	Windows-based
Drive Interface	SINAMICS S120
Applications	Milling, turning, grinding, laser
Display	TFT color display, various sizes