Siemens SINUMERIK 840D sl Series User Manual

08/2005 List of Action Numbers
3-961
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
No. 58
No. 59
No. 60
No. 61
No. 62
Explanation Wait for end of program (channel communication, NC block: WAITE).
Not allowed if -
Remedy -
Explanation Program selection from another channel, synchronously (channel communication, NC
block: INIT + SYNC).
Not allowed if -
Remedy -
Explanation Wait until acknowledgement from MMC (NC block, MMC_CMD)
Not allowed if -
Remedy -
Explanation Activate the skip-block function (VDI signal: Skip block).
Not allowed if Nesting depth too great.
Remedy − Wait until the preceding ASUB is complete or
− Abort program
Explanation Deactivate the skip-block function (VDI signal: Skip block).
Not allowed if Nesting depth too great.
Remedy − Wait until the preceding ASUB is complete or
− Abort program

Siemens SINUMERIK 840D sl Series Specifications

General

Control Type	CNC
PLC	Integrated SIMATIC S7-300
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Max Axes	31
Programming Languages	DIN/ISO 66025, high-level language (C/C++), Siemens programming languages (e.g., ShopMill, ShopTurn)
Safety Features	Integrated safety functions (Safety Integrated)
Operating System	Windows-based
Drive Interface	SINAMICS S120
Applications	Milling, turning, grinding, laser
Display	TFT color display, various sizes