© Siemens AG, 2002. All rights reserved
A-50 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition
Set drill points 2-23
Set the contour end point 2-22
Set the contour label 2-22
Set the contour start point 2-21
Set the zero point 2-21
Settings 3-28
Show hatching and dimensions 2-25
Software 1-17
Status line 3-28
T
Target systems 1-17
Toolbar 2-20
Turn contour 2-25
U
Undo last action in contour trace 2-20
Z
Zoom areas 2-24
To Next Page
Loading...
