ted file
2
Siemens AG, 2002. All rights reserved
2-24 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition
Zoom / keys "+" and "– "
You can use the mouse button to select a zoom area within a drawing.
By clicking the button and using a "lasso" or the "+" and "–" keys, you
can increment or decrement the magnification of the zoomed area.
You can move the zoomed area with the cursor keys.
2.6 Process an imported file
Redraw / space bar
Redisplays the current drawing in optimized form according to the
layer selection.
Geometry
When you click this button, the coordinates for the selected element
as defined by the current zero point are displayed. If the display box
includes an Edit button, you can select it to edit the element.
Note
This function is useful for making minor changes to the geometry
designed to remedy shortcomings (particularly missing intersections)
in the CAD drawing.
Use the geometry processor to make bigger changes.
You cannot undo changes once they have been made.
Layer selection:
A selected DXF file is always displayed initially with all its layers. If the
file contains several layers, these are all displayed in the basic view.
It is possible, however, to hide layers which do not contain any data
relevant to the contour. It is also possible to select contours that are
defined over several layers in a selection box for the contour trace.
Layer selections cannot be undone.
To Next Page
Loading...
