0
03.02 Preface
Structure of manual
0
Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition 0-9
Structure of descriptions
All functions and operating options have been described according to
the same internal structure as far as this is meaningful and
practicable. The various levels of information have been structured so
that you can find the information you are looking for quickly.
1. Function
This theoretical section is primarily intended as learning material for
the NC beginner. It provides important information that will help you to
understand the principle of operating functions.
You should work through the manual at least once to get an idea of
the scope of the functions and capability of your SINUMERIK control.
2. Operating sequence
This section provides a clear diagrammatic description of the
sequence of key inputs required. If inputs have to be made at
individual stages of the sequence or if you require additional
information, you will find this next to the key illustrations.
3. Further notes
For safety reasons, some of the functions are protected from access
by unauthorized persons. The machine-tool manufacturer can
influence or modify the described functions. Please follow the
instructions of the machine-tool manufacturer.
To Next Page
Loading...
Need help?
General
