11.92 9 Examples
9.1.4 Display "Selection"
Softkey "BUFFER ASSIG."
Provides an overview display of the following buffers:
• Spindle (DW address 4)
• Gripper 1 (DW 5)
• Gripper 2 (DW 6)
• Changing position
(actual position of magazine which is defined as "Magazine to be loaded" via machine
data, currently defined in DW 136 of DB 146)
• Loading point (change position + offset 1 (currently DW 137 of DB 146)
Softkey "ASSIGNMENT"
Provides magazine assignment of selected magazine starting from specified locator number.
Softkey "SEARCH FOR T NO"
Provides list of all the identical tools in all magazines and in the buffer.
Softkey "LD/UNLD MAG."
Provides loading/unloading display for first-time data input in the magazine table or data
readout from magazine table.
(The loading line is displayed on the screen (DW 2). During display selection, a D No. is
entered in the reference list of the loading line if a D No. is not yet available.)
Displays cannot be selected for fictitions magazines. A message is output.
Softkey "LD/UNLD SPINDLE"
Provides loading/unloading display for data input in spindle or data output from spindle.
(The loading line is displayed on the screen (DW 2). During display selection, a D No. is
entered in the reference list of the loading line if a D No. is not yet available.)
When the ECT key is pressed, the second selection form is selected.
Displays cannot be selected for fictitions magazines. A message is output.
© Siemens AG 1991 All Rights Reserved 6FC5 197-0AA40-1BP1 9–5
SINUMERIK 840/880 (PJ)
To Next Page
Loading...
