Siemens SINUMERIK 880 GA2

11.92 9 Examples
9.1.12 Display "Manual unloading via loading point"
9.1.12 Display "Manual unloading via loading point"
ACKNOWL-
EDGE
ABORT
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
Manual unloading via loading point:
a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a a a a a a a a a a a a a a a a a a a a a a a a a
a
a
a a a a a a a a a a a a a a a a a a a a a a a a a
a
AUTOMATIC
a a a a a a a a
a
a a a a a a
a
a a a a a a a a
1.1
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
L1:
L2:
R:
Spec. tool life:
102
1000
33
1000
100
1000
Spec. tool life:
T No.:
Size:
1
Duplo No.:
Prewarning limit tool life:
Geometry:
2
1
Type:
Cutting edge No.:
50
Wear:
L1:
L2:
R:
0.001
0.001
0.001
The recall key is unassigned in this display. A return to a higher menu level is possible only
with the function keys "Acknowledge" or "Abort".
Softkey "ACKNOWLEDGE"
A check is made whether the T and Duplo No. entered in the loading line are entered at the
loading point. If this is the case, the magazine location is deleted and the D Nos. of the
reference list released.
Return to the next highest level in the menu tree and display of the loading line with the data
deleted.
Softkey "ABORT"
Return to the next highest level in the menu tree and display of the loading line with the data
deleted.
© Siemens AG 1991 All Rights Reserved 6FC5 197-0AA40-1BP1 9–13
SINUMERIK 840/880 (PJ)