Siemens SINUMERIK ONE MCP 2400.4c Operation/Programming

2
Setting Up the Machine 08/2005
2.5 Tools
2
♥ Siemens AG, 2005. All rights reserved
2-60 SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
Length X
Length Z
Diameter
Pitch
Screw tap
Length Z
Length X
Diameter
3D probe
Tool list
The tool list is adapted by the machine manufacturer if necessary.
Please also refer to the machine manufacturer's instructions.
Loc. Location number in the magazine
The tool’s location number, which is located in the revolver in the
machining position, has a gray background.
If you are working with several magazines, then you will first see the
magazine number and then the location number inside the magazine
(e.g. 1/10). Tools that are not currently located in the magazine are
displayed without a location number. (You will find these tools when
sorting for a magazine location at the end of the tool list.)

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English