EasyManuals Logo

Siemens SINUMERIK ONE MCP 2400.4c User Manual

Siemens SINUMERIK ONE MCP 2400.4c
940 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #167 background imageLoading...
Page #167 background image
4. If the machine has a gearbox for the spindle, set the gear stage (e.g. auto).
5. Select a spindle direction of rotation (clockwise or counterclockwise) in
the "Spindle M function" field.
6. Press the <CYCLE START> key.
The spindle rotates.
7. Select the "Stop" setting in the "Spindle M function" field.
Press the <CYCLE START> key.
The spindle stops.
Note
Changing the spindle speed
If you enter the speed in the "Spindle" field while the spindle is rotating, the new speed is
applied.
5.2.4 Position spindle
Procedure
1. Select the "JOG" operating mode.
2. Press the "T, S, M" softkey.
3. Select the "Stop Pos." setting in the "Spindle M function" field.
The "Stop Pos." entry field appears.
4. Enter the desired spindle stop position.
The spindle position is specified in degrees.
5. Press the <CYCLE START> key.
The spindle is moved to the desired position.
Execution in manual mode
5.2 Selecting a tool and spindle
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 167

Table of Contents

Other manuals for Siemens SINUMERIK ONE MCP 2400.4c

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SINUMERIK ONE MCP 2400.4c and is the answer not in the manual?

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General IconGeneral
BrandSiemens
ModelSINUMERIK ONE MCP 2400.4c
CategoryControl Systems
LanguageEnglish

Related product manuals