Siemens SINUMERIK ONE MCP 2400.4c User Manual

=
7. Use the traversing keys (e.g. Z +) to traverse the tool from the workpiece
according to the retraction axis displayed in the "Retract Tool" window.
8. Press the "Retract" softkey again when the tool is at the desired position.
Execution in manual mode
5.6 Manual retraction
Milling
178 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English