Siemens SINUMERIK ONE MCP 2400.4c User Manual

5. Enter the number of the starting hole and press the "OK" softkey.
Program processing starts with the specified technology at the specified
starting hole - and goes to all additional positions of this position pattern
and all of the following position patterns.
Note
If you have hidden certain positions, then only the displayed positions
are applicable for the starting hole number.
Machining the workpiece
6.7 Starting machining at a specific point
Milling
208 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English