Siemens SINUMERIK ONE MCP 2400.4c User Manual

Deleting a tool in a file
1. The tool list is open.
2. Position the cursor on the tool that you wish to delete.
3. Press the "Delete tool" and "In file" softkeys.
3. Navigate to the required directory and press the "OK" softkey.
4. Enter the required file name in the "Name" field and press the "OK" soft‐
key.
The field is preassigned with tool names.
The tool is unloaded and the tool data is written to the file. The tool is then
deleted from the NC memory.
Tool management
13.5 Tool list
Milling
712 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English