Siemens SINUMERIK ONE MCP 2400.c - Page 16

Panel cutout
The MCP 2400.c is secured using 14 M5 nuts. The tightening torque is 1.5 Nm. Use spring
elements in addition to the M5 nuts.
5]


s




[


s



*) In the sealing area
Figure 3-2 Panel cutout of MCP 2400.c (all speci󹪝cations in mm)
Dimension drawings
ONE MCP Part 2: MCP 2400.c
16 Equipment Manual, 07/2020, A5E50324716B AA